V2C - Datamanager Modbus TCP & RTU


1					www.v2charge.com
2	Support information	https://v2charge.com/es/trydan/soporte
3	Releases	https://v2charge.com/es/actualizaciones-trydan/
4	Last Review	04/05/26	Firmware V 2.4.4
5
6	RS485 Modbus
7	TCP	Port: 502	Server ID: 1 ( 0x01) (Default address)
8	RTU	Baud: 9600, bits: 8N1	Server ID: 20 ( 0x14 ) (Default address)
9
10	WRITE HOLDING REGISTER 0X06
11	REF	UNIT	HEX	TYPE	DESCRIPTION
12	WRITE_ADDRESS_PAUSE	6010	177A	Int	0: No pause // 1: pause
13	WRITE_ADDRESS_LOCK	6011	177B	Int	0: Unlock // 1: Block
14	WRITE_ADDRESS_PROMGRAM	6012	177C	Int	0: Disable schedule // 1: Enable schedule
15	WRITE_ADDRESS_INTENSITY	6013	177D	Int	6-32 intensity value (Amperes)
16	WRITE_ADDRESS_DYNAMIC	6014	177E	Int	0: Dynamic control off // 1: Dynamic control on
17	WRITE_ADDRESS_PAYMENT	6015	177F	Int	0: Payments disable // 1: Payments enable
18	WRITE_ADDRESS_OCPP	6016	1780	Int	0: OCPP disable // 1: OCPP enable
19	WRITE_ADDRESS_MIN_INTENSITY	6017	1781	Int	Set minimum Intensity limit (A)
20	WRITE_ADDRESS_MAX_INTENSITY	6018	1782	Int	Set maximum Intensity limit (A)
21	WRITE_ADDRESS_PAUSE_DYNAMIC	6019	1783	Int	0 Resume Dynamic Control Modulation 1 Pause Dynamic Control Modulation
22	WRITE_ADDRESS_DYNAMIC_POWER_MODE	6020	1784	Int	0 Enable Timed Power; 1 Disable Timed Power 2 Disable Timed Power and set Exclusive Mode 3 Disable Timed Power and set Min Power Mode 4 Disable Timed Power and set Grid+FV mode 5 Disable Timed Power and set Stop Mode	2, 3 and 4 FV modes setted only have effect in FV installations
23	WRITE_ADDRESS_CONTRACTED_POWER	6021	1785	Int	Set Contracted Power in Watts	Only enabled when Timer Power is disabled and FV mode setted different to Exclusive
24	WRITE_ADDRESS_GRID_L1_POWER	6022	1786	Int	Modbus Feeder config in Dynamic Power Control DPC (send information of L1 grid consumption) Positive or Negative values (Watts)
25	WRITE_ADDRESS_SUN_POWER	6023	1787	Int	Modbus Feeder config in Dynamic Power Control DPC (send information of solar Energy) Positive Values (Watts)
26	WRITE_ADDRESS_BATTERY_POWER	6024	1788	Int	Modbus Feeder config in Dynamic Power Control DPC (send information of power of Battery) Positive or Negative values (Watts)
27	WRITE_ADDRESS_VOLTAGE	6025	1789	Int	Send Voltage of installation to the charger (Volts)
28	WRITE_ADDRESS_LOGO_LED	6026	178A	Int	0 Disable Logo LED // 1 Enable Logo Led
29	WRITE_ADDRESS_LIGHT_LED	6027	178B	Int	Send led light percentage: 0-100 (only on newer boards)
30	WRITE_ADDRESS_GRID_L2_POWER	6028	178C	Int	Modbus Feeder config in Dynamic Power Control DPC (send information of L2 grid consumption) Positive or Negative values (Watts)
31	WRITE_ADDRESS_GRID_L3_POWER	6029	178D	Int	Modbus Feeder config in Dynamic Power Control DPC (send information of L2 grid consumption) Positive or Negative values (Watts)
32
33
34
35
36	READ HOLDING REGISTER 0X03
37	REF	UNIT	HEX	TYPE	DESCRIPTION	WORDS (UINT16)
38	READ_ADDRESS_CHARGE_STATE	3010	BC2	Float (Big Endian)	0 - STATE A - (waiting EV) 1 - STATE B - car connected 2 - STATE C - car charging 4 - STATE F - system fail / leak detected 5 - STATE E - error CP state E / ground fail 6 - STATE D - ventilation required	2
39	READ_ADDRESS_CHARGE_POWER	3011	BC3	Float (Big Endian)	Charger Power (Watt)	2
40	READ_ADDRESS_CHARGE_ENERGY	3012	BC4	Float (Big Endian)	Energy in (kWh)	2
41	READ_ADDRESS_SLAVE_ERROR	3013	BC5	Float (Big Endian)	00 No error 01 Communication 02 Reading 03 Slave 04 Waiting WiFi 05 Waiting communication 06 Wrong IP 07 Slave not found 08 Wrong Slave 09 No response 10 Clamp not connected	2
42	READ_ADDRESS_CHARGE_TIME	3014	BC6	Float (Big Endian)	Load time in seconds	2
43	READ_ADDRESS_PWM_VALUE	3015	BC7	Float (Big Endian)	ADC PWM value	2
44	READ_ADDRESS_HOUSE_POWER	3016	BC8	Float (Big Endian)	House Power (Watt)	2
45	READ_ADDRESS_FV_POWER	3017	BC9	Float (Big Endian)	PV Power (Watt)	2
46	READ_ADDRESS_PAUSE	3018	BCA	Float (Big Endian)	Pause status information	2
47	READ_ADDRESS_LOCK	3019	BCB	Float (Big Endian)	Locked status information	2
48	READ_ADDRESS_PROMGRAM	3020	BCC	Float (Big Endian)	Scheduled status information	2
49	READ_ADDRESS_INTENSITY	3021	BCD	Float (Big Endian)	Current intensity	2
50	READ_ADDRESS_DYNAMIC	3022	BCE	Float (Big Endian)	Active dynamic control status information	2
51	READ_ADDRESS_PAYMENT	3023	BCF	Float (Big Endian)	Payment Active status information	2
52	READ_ADDRESS_OCPP	3024	BD0	Float (Big Endian)	OCPP active status information	2
53	READ_ADDRESS_MIN_INTENSITY	3025	BD1	Float (Big Endian)	Minimun Intensity limit (A)	2
54	READ_ADDRESS_MAX_INTENSITY	3026	BD2	Float (Big Endian)	Maximun Intensity limit (A)	2
55	READ_ADDRESS_PAUSE_DYNAMIC	3027	BD3	Float (Big Endian)	1 Dynamic Control Modulation Pause 0 Dynamic Control Modulation Working	2
56	READ_ADDRESS_DYNAMIC_POWER_MODE	3028	BD4	Float (Big Endian)	0 Timed Power enabled; 1 Timed Power Disabled 2 Timed Power Disabled and Exclusive Mode setted 3 Timed Power Disabled and Min Power Mode setted 4 Timed Power Disabled and Grid+FV mode setted 5 Timed Power Disabled and Stop Mode setted	2
57	READ_ADDRESS_CONTRACTED_POWER	3029	BD5	Float (Big Endian)	Contracted Power in Watts	2	(-1 when Timer Power is disabled or FV mode is setted to Exclusive)
58	READ_ADDRESS_VOLTAGE	3030	BD6	Float (Big Endian)	Voltage of installation (V)	2
59	READ_ADDRESS_LOGO_LED	3031	BD7	Float (Big Endian)	0 Disable Logo LED; 1 Enable Logo Led	2
60	READ_ADDRESS_LIGHT_LED	3032	BD8	Float (Big Endian)	Light LED intensity (%)	2
61	READ_ADDRESS_CHARGE_POWER_L1	3033	BD9	Float (Big Endian)	Charger Power in L1 (Watt)	2
62	READ_ADDRESS_CHARGE_POWER_L2	3034	BDA	Float (Big Endian)	Charger Power in L2 (Watt)	2
63	READ_ADDRESS_CHARGE_POWER_L3	3035	BDB	Float (Big Endian)	Charger Power in L3 (Watt)	2
64	READ_GRID_POWER	3036	BDC	Float (Big Endian)	Grid Power (Watt)	2
65	READ_BATTERY_POWER	3037	BDD	Float (Big Endian)	Baterry Power (Watt)	2
66	FIRMWARE_VERSION	3038	BDE	Float (Big Endian)	Firmware version (Major, minor, patch, beta : 2 3 20 0)	8
67
68
69
70
71	Do you need more register? Please send us an improvement
72	https://v2charge.atlassian.net/servicedesk/customer/portal/3